Skip to content

What Is Voltage Drop?

Voltage drop is the change in voltage across a part or along a current path. For a basic DC resistor, it equals current times resistance.

Formula

Voltage drop = I × R for the stated DC resistive model. I is current through the path and R is its resistance. Include the complete current path relevant to the question. In a series circuit, individual component drops add to the source voltage. A component-terminal calculation and a cable-run calculation can use related equations while referring to different physical boundaries.

Related quantities
QuantityQuestion it answers
Voltage drop (V) How much potential difference appears across the chosen path?
Resistance (Ω) How does that path relate voltage to current?
Ampacity (A) What current can the conductor carry under its conditions of use?

Worked examples

For an illustrative ideal DC circuit, 3 A through 4 Ω produces a 12 V drop. If several resistors share one series path, the current is common to them and each drop follows its own resistance. The drops around the complete path balance the source voltage. This example demonstrates the basic relation; it does not assign a resistance or a current rating to a particular cable.

Reading a specification

For a practical run, identify the source and load terminals, one-way length, return path, conductor material, and temperature basis before using a cable-loss tool. An AC run may also involve reactance and phase relationships, so the simple DC equation needs its stated scope. A low calculated drop addresses delivered voltage, while conductor temperature and permitted current require their own checks. Keep these questions separate in calculation notes. Record whether the result is a voltage in volts or a fraction of the chosen supply voltage. The DOE handbook supports the basic circuit relationships explained here.

Useful calculators

Use Ohm's law for a component relationship, voltage drop for the tool's stated cable model, or wire resistance for uniform-conductor resistance. Check the conditions shown by each tool before reusing a result.

Sources

Related terms