Brightness, not electrical input
What this result means
Lumens measure light output. Watts measure power. This tool compares your lumen figure with historical incandescent replacement classes in the cited ENERGY STAR guidance. It does not calculate the electrical input of an LED, a fixture, or a driver.
For example, the guidance associates at least 800 lumens with a 60 watt incandescent replacement. An LED offering that brightness can draw a different amount of power. For electrical-load and running-cost calculations, use the actual input watts printed on that product's Lighting Facts label or nameplate.
How to use the comparison
- Read the lumen figure on the package for the lamp you are comparing.
- Enter that figure and select Calculate. Without JavaScript, the same calculation runs on the server.
- Read the result as a historical incandescent brightness class, not as the lamp's actual wattage.
- Check the package's input watts separately before moving to a power or cost calculator.
How the class is selected
The tool selects the highest comparison class whose published minimum brightness your input meets. It does not interpolate between classes or round a below-threshold input up to the next class. The minimum brightness for the selected class appears with your result.
The supported input range is 450–20000 lumens. Above the highest listed comparison threshold, the result remains at the last class. That is the limit of this comparison, not a prediction of how much power a brighter lamp consumes. Check the original ENERGY STAR guidance for the complete comparison chart; it is not reproduced here.
Worked example: replacement versus actual watts
Enter 800 lumens to see the historical replacement class of 60 watts. For a hypothetical lamp whose label separately states 9 input watts, use 9 watts in a load or cost calculation, not 60. The 9 watt figure in this example is an explicit assumed label value, not a typical LED rating or a product recommendation.
The distinction matters when adding several lamps. Add their actual input watts for electrical power. Do not add their incandescent-equivalent marketing wattages. The example does not determine current without the required supply and power-factor inputs.
Limitations
This is a calculation aid, not a permit.
Watts to amps starts at this equivalent wattage, 120 volts, single-phase. That is the old incandescent load, not an LED nameplate.
What the tool cannot determine
It does not specify a room's required lighting level, color temperature, color rendering, dimmer compatibility, fixture suitability, circuit capacity, or installation safety. Lumens alone do not provide those answers. Use the exact product documentation and, where needed, a qualified designer or installer.
If you have a documented luminous efficacy, electrical watts can be calculated from lumens divided by lumens per watt. This comparison tool deliberately does not assume an efficacy: products and operating conditions differ.
Sharing and printing
A filled-in link retains your lumen input. Its canonical address remains the clean tool URL. The print control keeps the result and its assumptions together. Any next-step link uses the historical incandescent load only; replace it with actual nameplate watts when assessing an LED.
Sources
- ENERGY STAR, Learn About Brightness. Accessed 2026-10-18.
- Federal Trade Commission Consumer Advice, Shopping for Light Bulbs. Accessed 2026-10-18.
ENERGY STAR supplies the historical brightness comparisons. The FTC explains the difference between lumens and watts on the Lighting Facts label. Neither source's chart, artwork, or layout is reproduced.
Cite this page
Wattopedia Editorial Team. Lumens to watts. https://wattopedia.com/lumens-to-watts . Updated 2026-10-29.