1 kWh/m²/day = 1 peak sun hour
How to use this calculator
- Pick a city.
- The card returns annual peak sun hours on a horizontal surface.
- Submit the form if JavaScript is off.
- The same NASA POWER cell runs on the server, so the first number is already on the page.
- Take the hours to the solar panel page if you need array kilowatts.
The default is Golden, Colorado, near the NREL campus used by PVWatts. NASA POWER's current Climatology API reports annual horizontal GHI of 4.7395 kWh/m²/day there for January 2001 through December 2025. That equals 4.7395 peak sun hours. Phoenix is 5.8476. Miami is 5.0112. Boston is 3.8134. Seattle is 3.4178. Each is a gridded estimate, not a rooftop reading, US average, or tilted-array result.
NREL PVWatts names the same unit solrad. One kilowatt-hour per square meter per day is one peak sun hour. The physical idea is a day that delivered that much energy as if the sun shone at 1000 W/m² for that many hours. The dataset here is global horizontal irradiance, not plane-of-array irradiance at latitude tilt. A south-facing tilt usually collects more than GHI. This page does not invent that extra fraction.
Formula
PSH = GHI (kWh/m²/day)
There is no extra multiplier. The city list is the only input. If your roof is not in one of these five cities, look up ALLSKY_SFC_SW_DWN on NASA POWER for your latitude and longitude and type the hours on the solar panel page. Do not type 4.5 or 5.5 because a blog called that a US midpoint. Those midpoints are not in this dataset.
The default case
4.7395 hours. Next step carries an illustrative 12 kWh daily-energy input, 4.7395 hours, and efficiency 1 into the solar panel calculator. The energy value is not a household estimate or an appliance rating. Array kilowatts at efficiency 1 are 12 / 4.7395, which is 2.5319 kW.
Peak sun hours express daily solar energy as an equivalent number of hours at 1 kW/m²; they are not a count of daylight hours. This annual horizontal average also does not describe a particular month, panel tilt, shading pattern, or the timing of household demand.
Worked example
- You live in Phoenix and you want a first look at array size for 12 kWh per day.
- Pick Phoenix.
- The card prints 5.8476 hours.
- Open solar panel size.
- Keep 12 kWh and efficiency 1. The array is 2.0521 kW. If a module sheet says 400 W, 2.0521 / 0.4 is about 5.13 modules. This peak-sun page does not store 400 W. Count panels from the nameplate you hold.
If your documented scenario uses an efficiency factor of 0.86, type it on the solar panel page, not here. Hours stay 5.8476. Keep the resource value and system-loss assumption separate; mixing a loss factor into GHI would hide it.
Five NASA POWER cities
Each row is annual ALLSKY_SFC_SW_DWN from the NASA POWER Climatology API for January 2001 through December 2025. Units are kWh/m²/day, equivalent here to peak sun hours on a horizontal surface. Values are gridded location estimates, not rooftop measurements.
| City | Peak sun hours |
|---|---|
| Golden, CO (NREL campus) | 4.7395 |
| Phoenix, AZ | 5.8476 |
| Miami, FL | 5.0112 |
| Boston, MA | 3.8134 |
| Seattle, WA | 3.4178 |
How this fits the power chain
Peak sun hours feed solar panel size. Solar panel size feeds solar battery size if you need overnight storage. Inverter size is still watts divided by power factor, with no sun field. Generator size is still running and starting watts. Do not mix GHI into VA. Do not mix GHI into NEC 310.16.
A 2.5319 kW array at Golden is not a 2.5319 kVA inverter. Convert daily energy to an AC load first if you need VA. As a separate hypothetical, 12 kWh over 8 hours averages 1,500 W and would be 1,500 VA at power factor 1. Keep array and load ratings distinct.
Cloud cover is already inside ALLSKY_SFC_SW_DWN. Clear-sky irradiance would be higher. This page uses all-sky because that is the POWER parameter that matches a year of real weather. Do not add a second cloud derate on top of all-sky GHI unless a second dataset says to.
Monthly POWER values exist. Winter in Boston is lower than 3.8134. Summer is higher. This card prints the annual mean because the first planning question is a typical day, not a January design day. If you size for the worst month, look up that month on POWER and type those hours on the solar panel page. Do not invent a winter factor here.
Direct normal irradiance is a different POWER parameter. It is for concentrating collectors, not a typical rooftop module. This page does not mix DNI into GHI. If you have a tracker, POWER and PVWatts have tracker modes. Those modes are not in this five-city table.
The coordinates are city centers, not your roof. Golden uses the NREL campus latitude and longitude. Phoenix, Miami, Boston, and Seattle use the coordinates listed on the dataset page. A roof ten miles away is close on an annual GHI map, but it is not the same cell. When you have your own lat and lon, use POWER, then type hours on the panel page.
Common questions
What are peak sun hours in Golden, Colorado?
4.7395 hours per day on a horizontal surface from NASA POWER annual GHI. That is the default on this page because it is the NREL campus used by PVWatts.
Is this the same as a tilted roof?
No. Tilt usually increases collected energy relative to GHI. This card prints GHI. Type a POWER or PVWatts plane-of-array number on the solar panel page if you have one.
Why not a US average of 5.5?
Because 5.5 is not a NASA POWER cell and not a PVWatts default. Seattle is 3.4178. Phoenix is 5.8476. Averaging them would be a new number with no station.
How is this different from PVWatts?
PVWatts estimates annual AC energy from a system size, weather, and losses. This page only looks up GHI hours. Use solar panel size next if you already know daily kilowatt-hours.
Limitations
This is a calculation aid, not a permit.
The solar panel page starts with an illustrative 12 kWh per day, this city's hours, and efficiency 1. Type an explicitly documented loss factor there if your scenario requires one.
It does not apply latitude tilt. It does not run PVWatts hourly. It does not average the United States. It does not store 5.5 hours. It does not pick a tracker. It does not convert hours to kilowatts until you open the solar panel page. It does not store what you type. Search engines should use the clean address of this tool. It is not a permit. Shading, snow, and soiling still live on a site survey.
The address of a filled-in calculation includes the city. A filled-in address points its canonical link at the page with no query. Keep the city name with the hours. The print button hides the menu and the form. The steps stay. Hours on the meter are horizontal GHI, not a tilt promise and not a US midpoint.
Albedo and ground reflectance are not in ALLSKY_SFC_SW_DWN. Bifacial modules can collect extra from the ground. That extra is a product survey, not a NASA cell. Do not add 10 percent here because a datasheet mentioned bifacial gain. Type plane-of-array hours on the solar panel page if a survey includes it.
Leap days sit inside the January 2001 through December 2025 climatology window. The annual mean already includes them. Do not multiply 4.7395 by 365.25 on this card. This page prints hours per day, not kilowatt-hours per year. Annual energy is array kilowatts times hours times 365, and that product belongs after you have kilowatts from the solar panel page.
SYN1DEG is a one-degree grid. City coordinates snap to that grid. Two addresses in the same city can share a cell. That is why this list is five named points, not a rooftop survey. If you need a rooftop number, run POWER at your lat and lon and type the hours on the solar panel page. Keep the accessed date with the cell. This table was read on 7 October 2026.
Sources
- NASA POWER annual horizontal solar resource, Golden, Colorado (NREL campus). Accessed 2026-10-19.
- NASA POWER annual horizontal solar resource, Phoenix, Arizona. Accessed 2026-10-18.
- NASA POWER annual horizontal solar resource, Miami, Florida. Accessed 2026-10-18.
- NASA POWER annual horizontal solar resource, Boston, Massachusetts. Accessed 2026-10-18.
- NASA POWER annual horizontal solar resource, Seattle, Washington. Accessed 2026-10-18.
- National Laboratory of the Rockies, PVWatts V8 API documentation. Accessed 2026-10-16.
City hours come from NASA POWER ALLSKY_SFC_SW_DWN annual climatology. The unit identity with peak sun hours follows NREL PVWatts solrad. No 4.5 or 5.5 midpoint is stored in the engine.
Cite this page
Wattopedia Editorial Team. Peak sun hours. https://wattopedia.com/peak-sun-hours . Updated 2026-11-15.