VA = WDC / (η × PF)
How to use this calculator
- Enter the DC load at the operating point, the power-conversion efficiency, and the AC input power factor.
- The calculator first estimates real input watts from output watts and efficiency, then divides by power factor to estimate apparent input VA.
- The server renders the initial result without JavaScript.
The default is an illustrative 1000 W load, 0.8 efficiency, and 0.9 power factor. It is not a specification or typical value for a PC power supply. If either ratio is unknown, the result may not represent the actual input.
Formula
Input W = DC output W / η
Input VA = input W / PF
Efficiency must be from 0.5 to 1, power factor greater than 0 and no more than 1, and DC load from 1 to 100,000 W. These are input validation limits, not product-performance claims. This estimate does not include a recommended overhead or PSU-capacity selection.
Illustrative power-factor-one arithmetic
| DC output W | Efficiency | PF | Input VA |
|---|---|---|---|
| 500 | 1 | 1 | 500 |
| 1500 | 1 | 1 | 1500 |
| 3000 | 1 | 1 | 3000 |
Limitations
This is a calculation aid, not a permit.
Efficiency and power factor must describe the same operating point. Use measured or manufacturer values when available. The example inputs are illustrative, not typical PSU specifications; this estimate does not choose a PSU or add a capacity margin.
Sources
- U.S. Department of Energy Federal Energy Management Program, What Is Energy Efficiency?. Accessed 2026-10-19.
- U.S. Department of Energy Fundamentals Handbook: Electrical Science, Volume 3. Accessed 2026-10-21.
- NIST Handbook 130 – 2026, Section IV.B: Uniform Regulation for the Method of Sale of Commodities. Accessed 2026-10-19.
Cite this page
Wattopedia Editorial Team. PC power supply calculator. https://wattopedia.com/pc-power-supply-calculator . Updated 2026-10-29.