American Wire Gauge (AWG) is a size system based on nominal wire diameter. Within the numbered sequence, a higher gauge number means a smaller diameter.
Formula
The AWG sequence follows a geometric progression between its documented endpoints. For an ideal round conductor, area = π × diameter² ÷ 4. A diameter conversion and an area conversion therefore use different relationships. Wattopedia's AWG conversion uses the NIST/NBS geometry basis and reports nominal dimensions, rather than selecting an electrical current rating from the gauge label.
Related quantities
| Description | Meaning |
|---|---|
| AWG | A gauge designation for nominal conductor size. |
| Diameter | Distance across the nominal round conductor. |
| Cross-sectional area | Area of the conductor section, commonly expressed in mm². |
Worked examples
For a size comparison, 10 AWG is smaller than 8 AWG. The lower number identifies the larger nominal diameter in that part of the sequence. As diameter increases, area increases with its square rather than in a straight one-to-one proportion. The AWG progression also continues into the aught designations; retain the complete designation when entering a size. Writing only an isolated zero count can obscure which size was intended.
Reading a specification
A wire specification may include conductor material, stranding, insulation, temperature ratings, and terminal limits alongside the gauge. These fields affect electrical or installation properties and should stay attached to the product description. A geometry conversion can tell you the nominal area represented by a gauge, but it cannot establish permitted current or suitability for a particular installation. Rounded nominal diameters can also differ slightly from values recomputed at greater precision. Use the documented rounding basis when comparing charts. NIST/NBS Handbook 100 is the geometry reference for this page; no conductor-current table is reproduced here.
Useful calculators
Use AWG to mm² for nominal geometry, wire resistance with a stated material model, and wire size only within the checks and limits displayed by that tool. Keep the physical-size and installation questions distinct.
Sources
- NIST/NBS Handbook 100, Copper Wire Tables. Accessed 2026-10-20.