Skip to content

What Is a Watt?

A watt (W) is the SI unit of power, the rate at which energy is transferred or converted. One watt equals one joule per second.

Formula

For steady DC, P = V × I. For single-phase AC, P = V RMS × I RMS × PF. P is real power in watts, V is voltage, I is current, and PF is power factor. For balanced three-phase AC, use line-to-line voltage and line current with the square-root-of-three factor. Choose the circuit before converting a power rating into current.

Related quantities
QuantityWhat it tells you
Watt (W) Power at a stated operating condition.
Kilowatt (kW) The same power expressed in thousands of watts.
Watt-hour (Wh) Energy transferred over time.
Volt-ampere (VA) Apparent AC power; real watts also depend on power factor.

Worked examples

These are illustrative calculations, not typical appliance ratings. At 120 V, a load drawing 12.5 A at power factor 1 uses 1,500 W. The same power sustained for one hour transfers 1,500 Wh, or 1.5 kWh. At 240 V and the same power factor, 1,500 W corresponds to 6.25 A. Changing voltage changes the required current in this comparison; the chosen power remains the same.

Reading a specification

Look for the quantity named beside a product rating. Input watts describe power entering a device. Output watts describe the useful output under the maker's stated conditions. A battery label may instead give watt-hours, and an electricity bill usually reports kilowatt-hours. Record the operating mode and whether the value is rated or measured. A single watt figure cannot reveal daily energy use unless the operating time and changing load are also known. For a cycling load, measure energy over a representative period rather than assuming it runs continuously at its label power.

Useful calculators

Use watts to amps for current, amps to watts for power, and electricity cost for energy and cost over time. Enter the voltage and operating conditions from your own equipment.

Sources

Related terms