Convert capacitance to farads
Capacitors are commonly labeled with values that use submultiples of the farad. Select the unit that matches the value you enter. The calculator normalizes capacitance to farads, keeps voltage in volts, and displays the normalized capacitance with the result. This makes the scale visible before interpreting the answer. Use the value and units from the exact component information or measurement you intend to analyze. A unit error can change an energy estimate substantially, so check the label and the selected unit rather than relying on a familiar-looking number.
Check the answer and the chosen unit
Read the energy unit with the number. Joules measure energy, while volts measure electric potential. The two quantities are not interchangeable. The page also shows the capacitance after unit conversion, so you can compare it with the value on a label or in a data sheet. If the answer seems unexpected, check whether the chosen unit matches the entry and whether the voltage describes the capacitor itself. Do not change a circuit or handle a part based only on an estimate from this page.
Apply the stored-energy relationship
For an ideal capacitor, stored energy is E = ½ × C × V². Use capacitance in farads and voltage across the capacitor in volts; the result is joules. Because voltage is squared, changing voltage has a nonlinear effect on this ideal estimate. The calculator applies the equation to the submitted values and does not infer voltage from a power source or circuit. OpenStax describes capacitor energy as electrostatic potential energy stored in the electric field and gives the equivalent expression using capacitance and voltage. This page uses the formula as a factual reference and writes its explanation independently.
Use voltage across the capacitor
Enter the potential difference across the capacitor for the condition you want to estimate. A source's nominal voltage is not necessarily the voltage currently present on a capacitor. If the component is part of a series or parallel bank, a switching converter, or a circuit with a transient waveform, the voltage across an individual part may differ from a simple source label. This calculator accepts a single capacitance and voltage pair; it does not solve a network, combine multiple components, model ripple, or calculate peak and time-varying voltage. Establish the relevant voltage separately before interpreting the energy result.
Understand what ideal stored energy means
The displayed quantity is an idealized energy estimate for the entered capacitance and voltage. It is not a prediction of energy available to a load, energy delivered during a pulse, runtime, power, or loss. Real components and circuits can introduce leakage, equivalent series resistance, dielectric effects, tolerance, temperature dependence, and other behavior this simple formula omits. The tool also does not estimate how quickly a capacitor charges or discharges. Those questions require circuit details, a time-dependent model, and appropriate component data.
Do not infer a safe discharge or voltage rating
A calculated energy value does not indicate whether a capacitor is safe to touch, whether it has discharged, or which discharge procedure is appropriate. It does not check the component's maximum voltage, polarity, ripple-current limit, temperature range, or condition. Capacitors can retain charge after a circuit is disconnected. Follow the exact product documentation and applicable workplace procedures; use qualified help when handling equipment or stored electrical energy. The calculator deliberately gives no discharge instructions, hazard threshold, resistor recommendation, or component-selection advice.
Keep this estimate separate from related calculations
A capacitor code calculator decodes a marking, while an RC time constant calculator combines resistance and capacitance for an ideal first-order model. A power calculator needs a power relationship and its relevant inputs. These tools do not answer interchangeable questions. Retain the source and conditions for the voltage and capacitance used, then consult the component data sheet and circuit analysis for decisions involving a real device. This energy result is a bounded educational calculation, not a substitute for inspection or engineering review.
Worked examples
| Capacitance | Voltage | Ideal stored energy |
|---|---|---|
| 100 uF | 12 V | 0.0072 J |
| 2200 uF | 12 V | 0.1584 J |
| 1 mF | 5 V | 0.0125 J |
| 47 uF | 24 V | 0.013536 J |
| 10 uF | 100 V | 0.05 J |
Common questions
What is the energy formula for a capacitor?
For an ideal capacitor, E = ½ × C × V². Use farads and volts to calculate joules.
Does the result tell me how much energy reaches a load?
No. It is ideal stored energy, not delivered energy, usable energy, or pulse output.
Can this tell me how to discharge a capacitor?
No. It provides no discharge instructions or confirmation that a real component is safe.
Which voltage should I enter?
Use the voltage across the capacitor for the condition being estimated, not automatically the source's nominal voltage.
Limitations
Stored energy only; no discharge or component-rating assessment is made.
Sources
Related tools
Cite this page
Wattopedia Editorial Team. Capacitor energy calculator. https://wattopedia.com/capacitor-energy-calculator . Updated 2026-10-29.