Skip to content

Electrical quantities · Unit converter

Electrical unit converter

Convert supported units of the same electrical quantity using defined scale factors.

Choose units that describe the same quantity. This tool does not infer voltage, time, power factor, or a circuit model.

This electrical unit converter changes units for the same measured quantity. Choose both units. It will not guess missing circuit details.

ResultUNIT CONVERSION
Enter inputs result

Calculated result

Show steps
Entered value
Not stated
Quantity
Not stated
Source unit
Not stated
Target unit
Not stated

    Estimate only. Check equipment labels and local code.

    Choose units that describe the same quantity

    A unit name carries meaning. A volt measures electric potential difference, an ampere measures current, an ohm measures resistance, and a watt measures power. The converter groups each unit with its quantity and accepts a pair only when both belong to that same group. It then scales the value using the catalogued SI prefix or the cited energy and charge relationship. The source and target stay visible beside the answer, so a bare number is not mistaken for a complete result. If a pair is rejected, first check whether the question needs a separate physical input or an actual calculation rather than a unit conversion.

    Supported electrical unit families

    The allowlist covers voltage, current, resistance, conductance, power, energy, electric charge, capacitance, inductance, and frequency. The displayed options use familiar SI prefixes such as micro, milli, kilo, mega, and giga where supported. A prefix changes the scale of a unit, not the quantity it measures. For example, kilovolts and volts are both voltage, while milliamperes and amperes are both current. The list is deliberately finite and reviewed as data. An unfamiliar abbreviation is not accepted just because it resembles a known unit. This reduces ambiguity in capitalization, spelling, and symbols, including symbols whose case carries meaning.

    Energy and charge have defined unit relationships

    Some compatible conversions combine a named electrical unit with an SI relationship. The NIST unit guide lists watt-hour and kilowatt-hour relationships to joules, and ampere-hour relationships to coulombs. These relationships let the converter change energy units or charge units without inventing a voltage, a battery capacity, or an efficiency. A displayed ampere-hour value is a charge-unit conversion only. It does not say how much energy a battery stores, because that requires a voltage basis. A joule or watt-hour value is energy; neither one is a power value until a time interval and a different calculation are supplied.

    Use the controls without hidden defaults

    Enter the value as written by your source, then choose the source unit and target unit. No reading is prefilled, and no unit is silently selected. Submitting the form sends the value and unit identifiers to the server, which validates the allowlist and calculates the result before the page renders. This server result works even if browser scripts do not run. When the browser calculator is available, changing a field updates the same result using the mirrored conversion rules. The selected quantity, source, target, and conversion steps remain part of the result panel. Recheck the original instrument or document if an abbreviation is unclear before using the value elsewhere.

    Conversions that need more information are not included

    Amperes cannot be converted directly to watts without voltage and a circuit model. Watt-hours cannot be converted directly to ampere-hours without a voltage basis. Real watts and apparent volt-amperes need power factor and matching load conditions; they are not interchangeable labels. Resistance and conductance are related reciprocally, not by a simple SI prefix scale, so this page does not treat them as a direct same-quantity pair. Likewise, a wire gauge is not a unit prefix conversion, and ampacity is not calculated here. Use the dedicated calculator for the defined relationship and its inputs rather than trying to force an incompatible pair into this tool.

    Rounding and supported range

    Results are rounded to eight significant digits for display. This makes very small prefix conversions readable without erasing a nonzero value through coarse decimal rounding. The displayed precision does not improve the precision of the entered measurement. A result with many digits should not be treated as more accurate than its source. The tool accepts finite nonnegative values within its supported range and rejects outputs outside that range. It also rejects unsupported unit identifiers, incomplete submissions, and incompatible quantity pairs. If a value falls outside the supported limits, check its prefix and source before rescaling it manually; do not remove a prefix or decimal point simply to obtain an answer.

    Worked examples show the conversion method

    The examples below cover voltage, current, resistance, power, energy, charge, capacitance, inductance, frequency, and conductance. Each result is independently calculated from the unit factors used by the engine and the NIST definitions identified in the source list. The examples illustrate arithmetic only. They are not readings from a product, recommendations for a circuit, or typical operating values. For energy to average power, use the joules-to-watts calculator and supply the elapsed time. For watt-hours to amp-hours, use the dedicated conversion and enter a nominal voltage. For real power and current questions, select a circuit model in the appropriate calculator.

    A unit conversion is not an engineering decision

    This page does not check a design, select a component, determine conductor size, calculate a protective-device rating, or confirm compliance with an electrical rule. It has no equipment database and does not infer AC or DC conditions from a unit symbol. A correct scale conversion can still be irrelevant if the input describes a different quantity, operating point, or measurement basis. Keep the source of every value and its conditions with your result. For installation, wiring, protection, or equipment choices, consult the product documentation and applicable requirements with a qualified professional. Use the result as a transparent unit aid, not as permission to build or energize a circuit.

    Worked examples

    ValueFromToResult
    1.25kVV1250 V
    1.5kAA1500 A
    0.125MΩΩ125000 Ω
    3.2kWW3200 W
    1.25kWhJ4500000 J

    Common questions

    Can I convert amps to watts here?

    No. That calculation needs voltage and a defined circuit model, so the units are not a same-quantity pair in this converter.

    Does amp-hours converted to coulombs give battery energy?

    No. It converts electric charge units. Estimating energy also requires a voltage basis and does not establish usable battery capacity.

    Why are some unit pairs rejected?

    The tool accepts only supported units of the same physical quantity. It does not guess missing voltage, time, power factor, or circuit conditions.

    Limitations

    Same-quantity conversion only; not an equipment rating.

    Browse conversions

    Sources

    1. NIST Guide to the SI, SP 811, Appendix B.9
    2. NIST Special Publication 330, SI units and prefixes
    3. NIST Special Publication 330, SI prefixes

    Related tools

    Cite this page

    Wattopedia Editorial Team. Electrical unit converter. https://wattopedia.com/electrical-unit-converter . Updated 2026-10-29.