Skip to content

What Is a Volt?

A volt (V) is the SI unit of electric potential difference. One volt corresponds to one joule of energy per coulomb of charge.

Formula

Potential difference = change in electric potential energy ÷ charge. In a steady resistive circuit, V = I × R, where I is current in amperes and R is resistance in ohms. These equations connect voltage to different physical quantities. The first describes energy per charge; the second describes the voltage-current relationship of an ohmic component under its stated conditions.

Related quantities
QuantityWhat it describes
Volt (V) Potential difference between two points.
Ampere (A) Rate of charge flow through a path.
Watt (W) Rate of energy transfer or conversion.

Worked examples

In an illustrative DC example, 3 A through a 4 Ω resistor gives 12 V across that resistor. The same inputs give 36 W of dissipation. The voltage belongs to the two resistor terminals, while the current belongs to the path through it. Those different reference points explain why a volt figure alone cannot tell you how many watts a device uses. The example describes an ideal steady circuit, not a component power rating or a measurement procedure.

Reading a specification

When reading a voltage value, first identify the two reference points. In an AC system also check whether the value is RMS, peak, line-to-line, or line-to-neutral. A DC label should retain its polarity and nominal or measured basis. Equal voltage labels do not establish matching connectors, polarity, frequency, current capability, or equipment approval. Use the equipment documentation to establish compatibility. In calculation notes, name the measurement basis alongside the value rather than shortening every voltage to an unlabeled number. This makes it possible to choose the right conversion without silently mixing AC and DC quantities.

Useful calculators

Use electrical unit conversion to change units, Ohm's law for a resistive relationship, or volts to watts when the matching current and circuit conditions are known.

Sources

Related terms