Vout = Vin × R2 / (R1 + R2)
How to use this calculator
- Type the input volts and the two resistors.
- The card shows the voltage across R2 for an ideal, unloaded divider.
- Connecting a load across R2 changes the effective lower resistance and therefore changes the output; this calculator does not model that load.
The default is 12 volts with two 1000 ohm resistors. The output is 6 volts.
Formula
Vout = Vin × R2 / (R1 + R2)
This equation is derived from Ohm's law and the equal current through two series resistors. It assumes an ideal DC source, two ohmic resistors in series, and no load connected across R2. Volts must be from 1 to 1000. Each resistor must be greater than zero and not more than 1,000,000 ohms. This page does not size components or predict a real source's output impedance.
Worked example
12 volts with R1 at 2000 ohms and R2 at 1000 ohms is 4 volts out.
Divider outputs
| Volts | R1 | R2 | Output |
|---|---|---|---|
| 12 | 1000 | 1000 | 6 |
| 12 | 2000 | 1000 | 4 |
| 10 | 100 | 300 | 7.5 |
Limitations
This is a calculation aid, not a permit.
R1 is the resistor on the input side. R2 is the resistor across the output. Both must be greater than zero.
Sources
- OpenStax University Physics Volume 2, §9.4 Ohm's Law. Accessed 2026-10-19.
- OpenStax University Physics Volume 2, §10.2 Resistors in Series and Parallel. Accessed 2026-10-15.
Cite this page
Wattopedia Editorial Team. Voltage divider calculator. https://wattopedia.com/voltage-divider-calculator . Updated 2026-10-29.