Skip to content

What Is Electrical Efficiency?

Electrical efficiency is useful output divided by input. For a power converter, compare output watts with input watts at the same load. Some input energy becomes heat.

Formula

Efficiency η = useful output ÷ input. Multiply the ratio by 100 to express a percentage. For a steady power converter, input power = output power ÷ η, with η entered as a fraction. The difference between input and useful output represents losses or energy going outside the defined useful-output boundary. Define that boundary before comparing equipment.

Related quantities
QuantityComparison
Efficiency Useful output versus input across a device or process.
Power factor Real watts versus apparent VA at an AC connection.
Duty cycle Active time versus elapsed time.

Worked examples

For an illustrative converter delivering 900 W from 1,000 W input, efficiency is 90% and the difference is 100 W. This example explains the ratio; it is not a claim about a product. At the same output, a lower efficiency needs more input power. For a battery supplying an inverter, the battery-side voltage is also needed to estimate DC input current. Output watts alone cannot determine that current.

Reading a specification

Efficiency can vary with loading, temperature, voltage, and operating mode. A peak-efficiency headline may describe only one point on a performance curve. Check whether a specification includes standby consumption and whether it reports instantaneous power efficiency or energy over a longer test. Comparing a motor shaft output with electrical input uses a different useful-output boundary from comparing the two electrical terminals of a converter. Power factor also remains a separate property, even when both figures are printed in the same datasheet. Retain the stated conditions and use the value that matches the calculation you are performing.

Useful calculators

Use inverter current to explore input power and current, battery runtime for an energy estimate, and power factor for the separate AC relationship. Enter measured or manufacturer-supported conditions rather than borrowing a generic efficiency.

Sources

Related terms