Skip to content

What Is Apparent Power?

Apparent power is RMS volts times RMS amps for a single-phase AC load. Its unit is the volt-ampere (VA). It differs from real power in watts.

Formula

S = V RMS × I RMS for single-phase AC. P = S × PF converts apparent power S in VA to real power P in watts when the matching power factor PF is known. For a balanced three-phase load, apparent power uses the square root of three times line-to-line RMS voltage times line RMS current. Keep the circuit model with the result.

Related quantities
QuantityMeaning
VA or kVA Apparent power; kVA expresses thousands of VA.
W or kW Real power, the average energy-transfer rate.
var Reactive power in the stated AC model.

Worked examples

An illustrative single-phase load at 120 V RMS and 12.5 A RMS has 1,500 VA apparent power. If its power factor is 1, the real power is also 1,500 W. If the factor is lower, real watts are lower for that same voltage-current product. The example deliberately states the factor rather than assuming every load behaves alike. A VA rating and a watt rating can therefore describe different limits even when printed on the same product.

Reading a specification

Power supplies, transformers, and backup equipment may identify both real and apparent power. Read the named quantity before comparing specifications. A converter's output watts, its input VA, and its efficiency belong to different relationships. A rating should retain its input or output location, circuit arrangement, and operating condition. Apparent power alone does not reveal average energy consumption or how much real power a particular load requires. To estimate cost, obtain real power and operating time. To compare equipment capability, follow the applicable product documentation and all relevant limits.

Useful calculators

Use amps to kVA for the voltage-current product, VA to watts for a known factor, or kVA to kW when the values are expressed in thousands.

Sources

Related terms