Skip to content

Kilowatt and Horsepower: How to Convert kW to HP and HP to kW

Wattopedia Editorial Team Published Updated 5 min read
Kilowatt and horsepower

Kilowatt and horsepower both measure power, and 1 kilowatt equals about 1.341 mechanical horsepower. So to go from kilowatt to horsepower, multiply by 1.341. Going the other way, horsepower to kW, multiply by 0.7457.

That’s the short version. The longer one matters because “horsepower” isn’t one fixed number, and a small mix up can throw your result off. I’ll cover that below, plus kilowatt to megawatt, watt to kilowatt, BTU to kW and kilovolt ampere to kilowatt.

How do you convert kilowatt to horsepower?

Multiply the kilowatts by 1.341 and you’ve got mechanical horsepower. So 100 kW comes out near 134.1 hp. That’s the kilowatt to HP formula most people need. Carmakers often use metric horsepower, called PS, and for that you multiply by 1.3596 instead.

Here’s a quick kW to hp conversion table:

Keep all the digits until the very end. Rounding early is the easiest way to end up off by a few hp.

How do you convert horsepower to kW?

Multiply mechanical horsepower by 0.7457. That gives you kilowatts, so 10 HP is 7.457 kW. Electric horsepower uses 0.746 (5 HP is 3.73 kW), and metric uses 0.7355. The same rule works for any HP in kW question. Just pick the right horsepower first.

If you’d rather skip the math, our HP to kW calculator does it for you. It uses 746 watts per electric horsepower, which is the NIST value used in US electrical practice.

What is the difference between kilowatt and horsepower?

A kilowatt is an SI unit equal to 1,000 watts, and the BIPM SI Brochure (2019) defines one watt as one joule per second. Horsepower is an older unit from the steam engine days. Both describe how fast work gets done. A kilowatt is the bigger of the two.

Power is about speed, not size. Fill a bucket in 10 seconds and you’ve used more power than filling it in 60, even though the bucket never changed.

You’ll often see HP and kW printed side by side on spec sheets. That’s handy once you know they’re two rulers for the same thing.

Which horsepower are you using?

There are four common kinds. Mechanical horsepower is 745.7 watts, electric is 746, metric is about 735.5, and boiler is about 9,809.5. NIST Special Publication 811 (2008) lists these values. For a quick check, mechanical and electric are close enough to treat as the same.

Kilowatt and horsepower comparisons go sideways when people skip this step. Say a spec shows 110 kW. That’s about 147.5 mechanical hp, but about 149.6 PS. Two horsepower apart, same rating, just a different label. So kW to PS and kW to hp aren’t the same conversion.

How do you convert watt to kilowatt, kilowatt to megawatt, BTU to kW and kVA to kW?

Watts to kilowatts: divide by 1,000. Kilowatts to megawatts: divide by 1,000 again. BTU per hour to kW: divide by about 3,412. For kilovolt ampere to kilowatt, multiply the kVA by the power factor. None of these change how much power you have. They only change the label.

If you’re jumping between prefixes like watt to kW and kW to MW, the electrical unit converter keeps the units straight. It also refuses pairs that don’t match.

BTU usually shows up on air conditioners and heaters. It’s a heat rate, so 12,000 BTU/h lands at about 3.52 kW. Our BTU to watts calculator runs the same step.

What are the most common kilowatt and horsepower mistakes?

Mixing up horsepower types is number one. After that comes treating kVA like kW, and rounding too early. Some people also assume a conversion shows real output, but it doesn’t. It just restates the same number in another unit. Always say which horsepower you used.

  • Mixing horsepower types. Stick with mechanical unless the source says otherwise.

  • Treating kVA as kW. Kilovolt ampere to kilowatt needs the power factor, and our kVA to kW calculator shows that step. Going the other way, kW to kVA, you divide by it.

  • Reading a motor label as input power. The label shows output. The motor draws more because of losses.

Also remember that a rating can be peak or continuous. A conversion can’t tell you which. The spec sheet can.

How can you check a conversion quickly?

Run it backwards. If 100 kW became 134.1 hp, then 134.1 times 0.7457 should land near 100. If it doesn’t, you probably mixed horsepower types or rounded too soon. Keep four digits until the last step, then round once.

Two small habits help. Write the unit and the type every time, like 134.1 hp (mechanical). And if you use an online kilowatts to horsepower converter, check which horsepower it assumes.

What should you do next?

Kilowatt and horsepower measure the same thing, so the conversion is easy once you pick the right horsepower. Use 1.341 for kW to hp and 0.7457 for hp to kW. Grab one real rating from your own spec sheet, convert it now, and check it backwards. It takes about a minute.

FAQs

Why do EVs list power in both kW and hp?

Kilowatt is the SI unit, but many buyers still think in horsepower. Listing both helps people compare older cars with new EVs. Check which horsepower the brand uses, since PS and mechanical hp differ slightly.

What is the difference between kW and kWh?

A kW measures power at one moment. A kWh measures energy used over time. A 2 kW heater running for 3 hours uses 6 kWh.

How many watts are in one horsepower?

It depends on the type. Mechanical is 745.7 W, electric is 746 W, and metric is about 735.5 W. Multiply your HP value by the matching number.

What does PS mean on a car spec?

PS is metric horsepower, about 735.5 watts. That makes 100 PS slightly less than 100 mechanical hp.

Do I need an account to use Wattopedia calculators?

No. Wattopedia says its tools need no account. Each one shows its formula, inputs and assumptions, so you can check the math for kilowatt and horsepower work yourself.