Skip to content
Volts

How many volts is a 9 volt battery

How many volts is a 9 volt battery on this row is 9 volts nominal. The Energizer 522 datasheet for ANSI-1604A and IEC-6LR61 zinc-manganese dioxide alkaline prints that 9.0 volt figure. This row has no minimum and no maximum.

Nominal volts9.00
Minimum voltsNot in the cited source
Maximum voltsNot in the cited source
Chemistryzinc-manganese dioxide

Nominal is 9 volts. Chemistry is zinc-manganese dioxide. The datasheet name is Energizer 522. The size labels on that sheet are ANSI-1604A and IEC-6LR61. Those codes pick the rectangular snap pack, not a round cell. 522 is the catalog number, not a volt. ANSI-1604A contributes 1604 in the size name. IEC-6LR61 contributes 6 and 61 in the size name. None of 522, 1604, 6, or 61 is a second voltage on this card. Minimum volts are blank. Maximum volts are blank. This page will not invent a cutoff. A smoke alarm often uses this pack, and the row still does not assign hours.

Nominal 9 volts only

The only stored volt is 9. A meter that shows 9 volts matches the nominal from Energizer 522. A lower reading is not mapped here because the row has no minimum. Do not invent a cutoff from the round alkaline cards. Do not invent a charge ceiling. Rechargeable snap packs are not this row. Internal series cells exist inside a 9 volt alkaline can in real construction, and this page still only stores the finished pack at 9 volts nominal. File this pack with 522, not with a round cell sheet.

What this source cannot answer

People ask how long a detector lasts, what a guitar pedal draws, and what a round cell uses. Hours are not on the 522 voltage row. Round alkaline volts belong on the round-cell pages. Milliamp-hours are not copied onto this voltage card. Temperature curves are not copied here. If your meter shows a number that is not 9 volts, this page does not map it. Stop and read Energizer 522. Do not file a USB port here. Do not file a car pack here. The snap-pack markers are ANSI-1604A and IEC-6LR61. The 6 in IEC-6LR61 is a size code, not a six-cell lead-acid count.

What to do with the label

Match the pack to Energizer 522, ANSI-1604A, or IEC-6LR61 before you keep 9 volts as the alkaline snap nominal. If the print disagrees, drop the row. Carry 9 volts into a DC tool only for that alkaline snap pack at that nominal. Write zinc-manganese dioxide and 9 volt on the note so a round cell, a coin cell, or a lithium pack is not filed here. Do not convert 9 volts into watts. Do not invent a minimum because the row left it blank. A holder with two snap packs is a series pair, and this card still describes one pack. The 522 catalog number, the 1604 in ANSI-1604A, and the 6 and 61 in IEC-6LR61 stay as datasheet labels, not extra volts. Smoke alarms, analog pedals, and small transistor radios often take this snap. That job still does not add a watt or an hour to the card. If the clips are the rectangular snap pair, keep Energizer 522. If the holder is a round barrel, leave this card. Write 9 volts on the note as the pack nominal, not as a round-cell count.

Sources

See also