| Nominal volts | 12.00 |
|---|---|
| Minimum volts | Not in the cited source |
| Maximum volts | Not in the cited source |
| Chemistry | lead-acid AGM |
Yuasa lists the YTX12-BS at 12 V nominal. Its product page identifies this model as part of the YTX, YT, and YTB AGM VRLA battery series for motorcycles and other powersport uses. This gives us one exact model example. It does not show that every motorcycle uses the same battery or voltage. Check the full battery code on your own unit and match it to the vehicle maker's fitment information.
What nominal voltage means
Nominal voltage is the voltage class named by the product maker. For the YTX12-BS, that published class is 12 V. It is not a promise that a meter will show exactly 12 V at every moment. A battery's terminal reading can depend on its state and conditions. The Yuasa page cited here does not give a resting-voltage range, a full-charge threshold, a charging setpoint, or a starting test limit for this model. We leave those values out rather than infer them from the nominal rating.
This example is model-specific
The YTX12-BS is an AGM battery. Yuasa lists its series for motorcycles, but motorcycle battery choices still depend on the vehicle and the battery selected for it. A different model, chemistry, or electrical system may have other specifications. Do not treat this page as a universal motorcycle standard. Do not use the model number alone to decide whether a battery fits. Compare the complete part code with the vehicle maker's manual or an authorized battery fitment source. This page reports voltage only; it does not confirm that a particular battery is suitable for a particular motorcycle.
What this source does not tell you
Yuasa's product page lists nominal voltage for the YTX12-BS. It does not provide a voltage reading from a battery in service. It also does not state the charge level of a battery on a shelf, a charger target, or a minimum voltage for starting an engine. Those are different questions and need the right model instructions and test conditions. A single nominal value cannot diagnose a weak battery. If a meter reading concerns you, follow the motorcycle and battery makers' test steps or ask a qualified service shop. Do not apply an automotive battery chart to this model unless its maker says that chart applies.
Check the battery label and fitment
Start with the label on the battery installed in the motorcycle. Write down the complete model code, including letters and suffixes. Then look up that exact code on the maker's site. Confirm that the source calls the voltage nominal, rather than a charger or test value. Also check the vehicle manual or the maker's fitment guide before replacing a battery. A battery can share a nominal voltage with another model and still differ in size, terminal layout, chemistry, or fit. This voltage example cannot verify those other details for your bike.
Keep voltage readings in context
A label value and a meter value answer different questions. The label describes the maker's published specification for a product. A meter shows a reading under the conditions at the time of the test. The source record for this page supports the YTX12-BS nominal rating only. It does not support a pass-or-fail meter range. Keep the model code, test method, and maker's instructions together when recording a reading. If you compare another battery, use its own specification and preserve its chemistry and conditions. Do not copy the YTX12-BS figure onto a different model just because both batteries serve motorcycles.
Sources
- Yuasa YTX12-BS motorcycle battery specifications. Accessed 2026-10-14.
See also
Common questions
Is 12 V the measured voltage of every motorcycle battery?
No. Yuasa lists 12 V as the nominal rating for model YTX12-BS. It is not a measurement for every motorcycle battery.
Does nominal voltage show whether my battery is fully charged?
No. The cited Yuasa page does not give a full-charge threshold or a resting-voltage range for this model.
Can I use this figure to choose a replacement battery?
No. Confirm the full model and fitment in your motorcycle manual or the manufacturer's fitment guide.