Skip to content
Volts

How many volts is a lifepo4 battery

How many volts is a lifepo4 battery depends on the Victron Smart datasheet rather than a flooded starter rest table. That sheet states a 3.2 volt cell, 12.8 volts nominal, a charge window of 14.0 to 14.4 volts, and 14.2 volts recommended. This row stores 14.4 volts as the maximum while the rest-empty bound stays unpublished.

Nominal volts12.80
Minimum voltsNot in the cited source
Maximum volts14.40
Chemistrylithium iron phosphate

Nominal is 12.8 volts. Chemistry is lithium iron phosphate. The cell figure in the Victron title is 3.2 volts. Charge minimum in that title is 14.0 volts, which this brief stores as 14. Charge maximum is 14.4 volts, which this row stores as volts_max. Recommended charge is 14.2 volts. Those charge figures are charger setpoints from the datasheet title, not rest open-circuit values. This page will not invent a rest empty mark. Flooded starter rest tables belong on the car battery page. The 4 in LiFePO4 is the chemistry formula, not 4 volts.

12.8 volts nominal and the charge window

Keep the labels apart. Cell is 3.2 volts. Pack nominal is 12.8 volts. Charge low is 14 volts. Charge high is 14.4 volts. Recommended charge is 14.2 volts. A meter that shows 12.8 volts matches the stored nominal. A charger that holds 14.2 volts matches the recommended charge in the title. A charger that hits 14.4 volts is at the stored maximum. A charger that sits at 14 volts is at the title charge minimum. Do not treat 12.8 volts as a flooded rest full mark. Do not treat 3.2 volts as a coin cell. Do not invent a higher pack class. This card is the 12.8 volt pack in the Victron Smart datasheet title.

What this source cannot answer

People ask for rest empty volts, for cranking volts, and for a larger pack class. Rest empty is not in the stored title, so the minimum field stays blank. Cranking is not in the title. A larger pack class is not in this row. Amp-hours are not copied onto this voltage card. Bluetooth app screens are not copied here. If your meter shows a number that is not 12.8, not 3.2, not 14, not 14.2, and not 14.4, this page does not map it. Stop and read the Victron Smart datasheet. Do not file a USB bus here. Do not file a flooded starter rest table here. Low-temperature charge lockouts are not on this voltage row.

What to do with the charger

Set the charger from the Victron title, not from a flooded rest table. If you use 14.2 volts, you match the recommended charge. If you stay between 14 volts and 14.4 volts, you stay in the printed charge window. Carry 12.8 volts into a DC tool only when the pack is this lithium iron phosphate nominal. Carry 3.2 volts only as the cell figure. Write lithium iron phosphate and 12.8 volts on the note so a flooded starter pack is not filed here. Do not convert 12.8 volts into watts. Do not invent a rest minimum because the row left it blank. The 4 in LiFePO4 stays a formula mark. The stored maximum remains 14.4 volts. Cabin packs and small inverter banks often use this 12.8 volt class. That job still does not add amp-hours to the card. If the charger menu offers flooded rest setpoints, leave them. Use 14.2 volts when you want the recommended charge from the Victron title.

Sources

See also