Skip to content
Volts

CR2016 battery voltage

CR2016 battery voltage is 3.0 V nominal for the Energizer cell. This is the maker's listed value. It is not a test of the cell in your device.

Nominal volts3.00
Minimum voltsNot in the cited source
Maximum voltsNot in the cited source
ChemistryLithium manganese dioxide

Read capacity with its test conditions

The published typical capacity is 100 mAh to a 2.0 V endpoint, using a 30000 ohm load at 21 degrees C. Keep these conditions attached to the figure. Changing the test load or the endpoint changes the question being answered, so the capacity is not a direct prediction of service time in an arbitrary product.

A cutoff in a test is not a device rule

The capacity-test endpoint does not establish the lowest voltage at which your device will operate. Nor does the nominal figure establish a pass/fail result for a battery taken from equipment. Use the device manufacturer's battery guidance when deciding whether its specified cell needs replacement.

Match the complete designation

Check the full battery marking and the equipment's required replacement. A shared nominal voltage does not demonstrate equal dimensions, chemistry, holder fit, or application approval. Keep loose coin cells away from children and follow the maker's handling instructions. No recharge procedure or alternative cell is recommended by this reference.

Sources

See also