Skip to content
Volts

How many volts is a aa battery

How many volts is a aa battery? Energizer lists 1.5 volts as the nominal rating for the E91 alkaline cell. Its datasheet also uses 0.8 volts as an endpoint in stated capacity tests. That test value is not a universal minimum for every AA battery, device, or load. Check the exact cell chemistry and product label before using a voltage value.

Nominal volts1.50
Minimum voltsNot in the cited source
Maximum voltsNot in the cited source
Chemistryzinc-manganese dioxide

The cited Energizer E91 datasheet gives 1.5 volts as the nominal voltage for that AA alkaline model. Nominal describes the cell's rated voltage category; it does not promise that a meter will show the same reading at every moment. Cell voltage changes with state of discharge, current draw, temperature, age, and measurement method. The E91 is a zinc-manganese dioxide primary cell. A rechargeable cell that fits an AA holder can use another chemistry and a different nominal rating, so size alone is not enough to identify voltage. Treat 1.5 volts as a model-specific nominal value for E91, not as a guarantee for every cell sold in the AA form factor.

Nominal voltage and the capacity-test endpoint

The E91 datasheet's capacity tests discharge the cell to 0.8 volts under stated test conditions. That endpoint helps define how capacity was measured in those tests. It is not a universal operating minimum, a battery-health threshold, or a voltage at which every device must stop. Different equipment can stop working at different voltages, and another datasheet may use a different load or cutoff. This dataset therefore leaves a general minimum blank. Do not treat the test endpoint as a safe design limit or use it to decide that a battery can keep powering a particular device. For a runtime or low-voltage question, check the manufacturer's instructions for both the cell and the device.

What this source cannot answer

The E91 sheet does not tell you how long a remote, camera, sensor, or toy will run in your own use. Runtime depends on current draw, pulsed operation, temperature, the device's cutoff, and the condition of the cell. Nominal voltage alone cannot give capacity or energy. Do not multiply the nominal value by an assumed current unless the load conditions are known. The datasheet's capacity curves use defined test methods; they are not a promise for every product or duty cycle. This page also does not compare E91 with rechargeable nickel cells or lithium primary cells. Those products need their own manufacturer specifications and should not inherit this row's chemistry or test data.

How to check the cell and device labels

Read the battery jacket or packaging and confirm the manufacturer and model. For this entry, the source identifies Energizer E91 and the matching AA designation. If the label names a different chemistry or catalog model, find that product's datasheet instead of transferring the E91 values. Then check the device manual for its accepted battery types, polarity, and low-voltage behavior. A holder with several cells is a pack, not a single-cell entry; series wiring changes pack voltage, and this page does not calculate the pack. Keep the cell label, device model, and measurement conditions together in your notes. If they do not match, leave this reference aside and use the exact product documentation.

Sources

See also