Skip to content

Voltage in Germany: approximate 230 V and 400 V

Voltage in Germany is described by the NAV as approximately 230 V or 400 V by connection type, with approximately 50 Hz at the grid connection.

Voltage
approximately 230 V single-phase; approximately 230 V or 400 V three-phase
Frequency
approximately 50 Hz
Sources accessed
2026-10-19

Approximate values at the grid connection

Germany's Low Voltage Connection Ordinance describes voltage at the end of the grid connection as approximately 230 V for single-phase alternating current and approximately 230 V or 400 V for three-phase alternating current. It also describes the frequency as approximately 50 Hz. The regulation uses approximate wording rather than promising a precise value at a socket.

The connection depends on the installation

The ordinance says which current type and voltage matter for the contract depends on the installation connected or planned. Its stated measurement location is the end of the grid connection. Neither detail should be silently changed into a universal outlet reading or an assumption about every building.

Confirm the equipment requirements

Check the device input label and manufacturer instructions for the supply conditions it accepts. For an unknown connection or a concern about a local installation, contact the network operator or a qualified electrician. A voltage or frequency reference alone cannot determine whether a specific product is suitable.

Approximate, not an outlet guarantee The NAV describes approximate connection-end values and makes the contractual supply installation-dependent.