Skip to content

Voltage in Croatia: Nominal Supply Definitions

Voltage in Croatia is defined in the cited ministry rule as 230 V phase-to-neutral and 400 V between phases at 50 Hz. Read its scope and date.

Voltage
230 V phase-to-neutral; 400 V between phases (cited ministry rule)
Frequency
50 Hz nominal for the rule's four-wire three-phase networks
Sources accessed
2026-10-22

Which conductors the voltage refers to

The cited Croatian ministry rule defines nominal voltage as 230 V between phase and neutral, and 400 V between phases, for four-wire three-phase networks at a nominal 50 Hz. The conductor reference explains the pair: these figures are not interchangeable values for an ordinary appliance connection.

Nominal voltage is a network description

The rule separately defines supply voltage as an effective value at the supply terminals. A nominal network label is therefore not a reading taken at your property. The same document records a transition from older network values; that historical section should not be treated as an ongoing supply guarantee.

Keep the original publication date visible

This is an attribution to the ministry's original published rule, not a claim that this page has verified every later legal amendment. For current connection conditions or an equipment decision, obtain the applicable service details rather than treating an archived rule as site approval.

No installation instructions The reference does not select conductors, protective equipment or plugs. Qualified local assessment is needed where the actual connection requirements are uncertain.