What size generator to run a house depends on the loads you expect to operate at once. Record each product's ratings and plan which loads may overlap. This guide explains the calculator's combined running and startup inputs. It is not a whole-house recommendation.
What size generator to run a house
Begin with the equipment you consider essential during an outage. Make a list using the exact product names or model numbers so you can return to the right label or manual later. Decide which items you expect to operate together. A list of everything in a house is not the same as a plan for what will run at one time. If you can switch an item off before starting another, note that as a separate operating scenario rather than silently counting both as simultaneous.
Honda's generator guide labels its appliance figures approximate and warns users not to add every listed wattage without considering power management. Those figures are examples, not measurements of your appliance. The useful lesson is to plan which loads overlap, then check the values for the equipment you actually own. Do not copy an example from a general chart as if it were a rating for your model.
Record running and starting ratings
For each item on your list, record its documented running watts and any separately stated starting or startup watts. Keep the source beside the value, such as the product nameplate, owner's manual, or a manufacturer support page. If a document gives a range or more than one operating mode, record the wording and conditions; do not choose a midpoint that the manufacturer did not specify. Keep watt values in watts and do not mix them with volt-amperes, battery energy, or runtime.
If no starting value is provided, mark it unknown. The calculator cannot derive an appliance's startup demand from its name, size, or horsepower. Its default pair of 1,500 W is only an example input, not evidence that an appliance or a house needs that amount. A running-only total can help organize a plan, but it does not settle a generator choice when the startup demand remains unknown.
Build the highest combined startup scenario
First add the running ratings for the items you intend to operate together. That is the combined running input. Then consider each startup event in that plan. For one event, use the documented starting rating for the item that is starting and include the running ratings of other loads that stay on at that moment. If more than one item may start together, account for those overlapping starts. Repeat for the startup events you expect and keep the largest combined total. This is the highest combined startup input, not the starting rating of one appliance by itself.
For a purely hypothetical example, a planned group may have one total while running and a larger combined demand during a startup event. Enter those as separate values. This demonstrates why the calculator has two inputs; it is not a measurement or a typical home profile. If an item can be turned off before the event, write down that choice and make sure the planned operation matches it. If the overlap is uncertain, preserve that uncertainty instead of presenting the smaller scenario as guaranteed. Honda's warning about power management is relevant because the set of items operating together changes the total.
Use the calculator as an arithmetic check
Enter the combined running total and the highest combined startup total you assembled. The calculator returns the running input and the larger of those two totals as its startup-demand result. This simple calculation does not discover missing appliance values, choose a product, or account for an operating condition that was left out of your list. Review the steps and assumptions before you share or print a result.
A helpful worksheet has one row per appliance, its documented running value, its documented startup value if available, and a note about which other items may stay on when it starts. Keep a separate total for each plausible startup event. This makes it easier to spot when a single appliance surge was entered without the other loads that remain on, or when values from different scenarios were combined even though those items will not operate together.
Check the specific generator and installation
Compare your calculated demands with the running and startup capabilities stated for the specific generator you are considering. Read the complete product documentation and operating instructions; do not rely on a large peak-watt number alone. The Honda guide is general method context, not a statement about another manufacturer's model or a guarantee that your appliances will operate together.
This calculator is not a whole-home load study and does not select transfer equipment, wiring, permits, or an installation method. Those decisions depend on the exact equipment and local requirements. Confirm them with the relevant authority and a qualified electrician. Keep generator operation and safety within the manufacturer's instructions. If any required rating, simultaneous load, or product limit is unknown, resolve that gap before treating the estimate as a selection.
Sources
- Honda generator wattage estimation guide. Accessed 2026-10-19.