| Specification | Source-listed value |
|---|---|
| Source model: model | Avalon A10, US bottled-water dispenser product page |
| Source model: listed cooling power (W) | 100 |
| Source model: listed heating power (W) | 420 |
| Source model: cooling method | Compressor |
Calculate running cost
Enter electrical input watts from your appliance label or measurement. The reference does not establish a single running wattage.
Hours, days and rate start with the running-cost calculator's example, not your usage or tariff. Replace them with your own values. The result is in US dollars.
The Avalon A10 US product page lists cooling power of 100 W and heating power of 420 W in separate technical fields. The cold-water field also names a compressor cooling method. These specifications describe this bottled-water dispenser. They do not establish a power range for all water coolers, and neither entry is labeled as a measured average at the wall. Keep the manufacturer's field names with any quoted value.
Keep the hot and cold entries separate
The technical section groups each power label with its own water tank and output details. It does not give a combined whole-unit input test or state whether both functions were active during a measurement. Adding the labels would therefore create a total that the page does not report. Water delivery rate and tank capacity also describe different quantities; they cannot stand in for electrical consumption.
A rating does not tell you the daily schedule
The cited fields give no averaging interval, room condition or water-draw schedule for the power labels. They also supply no separate standby or startup measurement. To compare your own dispenser with another appliance, record the observation period and the enabled functions with an appropriate energy reading. A short reading during a refill or heating event should not be presented as the average for an entire day.
Use an energy record for a cost estimate
For a useful cost comparison, keep the cooler's exact model, observed interval and consumed energy together. Then apply the electricity price relevant to that interval. If you have only the product ratings, leave daily energy unknown instead of assuming continuous operation. This reference explains the source boundary; it does not select a backup supply, establish circuit capacity or infer an input-current rating from the separate power labels.
Sources
- Avalon A10 Top Loading Water Cooler Dispenser with hot and cold water - Avalon US. Accessed 2026-10-22.