| Specification | Source-listed value |
|---|---|
| Source model: model | Makita New Zealand MLT100N |
| Source model: continuous input (W) | 1,500 |
| Source model: supply (V) | 230 |
Calculate running cost
Enter electrical input watts from your appliance label or measurement. The reference does not establish a single running wattage.
Hours, days and rate start with the running-cost calculator's example, not your usage or tariff. Replace them with your own values. The result is in US dollars.
The MLT100N entry from Makita New Zealand labels its electrical power as continuous rating input and separately lists 230 V. Preserve the product and market with those values. Neither the model's cutting dimensions nor its no-load speed changes the meaning of that electrical rating. This page does not substitute another market's specification for the cited entry.
Amps and startup are not supplied here
The cited specifications do not give an input-current rating, power factor or startup power profile. Dividing the rated watts by voltage would not establish verified AC current. A generic surge multiplier would also introduce a number absent from the source. Equipment-selection questions need the saw's exact electrical documentation and the proposed supply's complete limits, not just a nominal watt comparison.
Compare cutting tasks on a matching basis
For an energy-per-cut comparison, identify the material, blade, work sequence and measurement boundary. A job record should distinguish active cutting from waiting time and state whether other equipment was included. If a dust extractor is measured on the same supply record, that total is not the saw alone. Keep tool ratings, task observations and any calculated estimates in separate fields so they can be compared honestly.
A reference rather than a setup plan
Match the nameplate and regional documentation before using this entry in notes about your saw. Missing current or startup information should be obtained from an appropriate manufacturer document or qualified reviewer. This page does not describe operating technique, protective-device sizing, wiring or generator compatibility. Use the energy and cost tools only with supported inputs and an explicitly stated period.
Sources
- Makita New Zealand MLT100N table-saw specifications. Accessed 2026-10-22.