Skip to content

How Many Watts Does an Electric Shaver Use? Charger Guide

How many watts does an electric shaver use? Philips lists 4.5 W maximum power consumption and a 5 V input for its X5006/00 shaver. These product specifications do not state the AC power drawn by a separate USB wall adapter.

Sourced appliance facts
SpecificationSource-listed value
Watts per kilowatt1,000
Source model: modelPhilips Shaver 5000X Series, model X5006/00
Source model: electrical input (W)4.5
Source model: input volts5

Calculate running cost

Published electrical input for Philips Shaver 5000X Series, model X5006/00. Actual energy depends on operating mode and time in use.

Hours, days and rate start with the running-cost calculator's example, not your usage or tariff. Replace them with your own values. The result is in US dollars.

Read the shaver and charger separately

A USB wall adapter sits between the outlet and this shaver. Its input describes the supply it accepts; its output describes what it can supply to the USB connection. The shaver's input is on the device side of that connection. Keep each rating attached to the component it describes.

Philips X5006/00 product specification: 4.5 W maximum consumption; 5 V input; A model-specific maximum-consumption specification and device input voltage, not a measured wall-adapter draw..

X5006/00 USB-A charging specification: 5 V DC supply; at least 1 A capability; The stated USB supply requirement, not a claim that the shaver continuously draws that current..

Philips USB-adapter guidance: 100-240 V input; 5 V output; at least 1 A output capability; Adapter-side requirements in manufacturer guidance, not a measured AC wattage or the label of a particular supplied charger..

How many amps does an electric shaver use?

The ampere figure in Philips' USB specification describes the supply capability requested for charging. It is not a measured motor current or an AC wall-input current. The maximum-consumption field also does not identify an average for shaving, charging or idle operation. This source cannot provide those separate values.

Charging time and battery runtime do not give charging energy

Philips advertises a full charge in 1 hour and up to 50 minutes of shaving for this model. Those time specifications do not establish kWh per charge. They also do not show that the listed maximum power is drawn throughout charging or shaving.

Use wall-side energy for a charging-cost calculation

A household electricity-cost comparison needs the wall-side energy used over the charging period you are counting. Keep the adapter model and measurement period with that result, including idle time if it is part of the comparison. Multiply the recorded kWh by your electricity rate per kWh. Neither the device's maximum-consumption figure nor the adapter's output capability supplies a measured charging total.

Sources

See also

Common questions

Is 4.5 W typical for every electric shaver?

No. It is Philips' maximum-consumption specification for X5006/00. It is not a category average or a measurement of every operating mode.

Does the USB specification mean the shaver draws 1 A?

No. The listed current describes the supply capability required for charging. It does not state the shaver's measured operating current or the adapter's AC input current.

Why do the charger and shaver list different voltages?

The adapter's input is on the outlet side, while its output feeds the device-side connection. Philips lists 5 V input for X5006/00. The USB-adapter guidance separately lists 100-240 V input and 5 V output for the adapter.

Can I calculate energy per shave from charging time?

The advertised charging and runtime figures do not include a measured energy-per-charge result. A cost calculation needs energy for the period and component you are counting, plus your electricity rate.