Skip to content

How Many Watts Does a Paper Shredder Use?

How many watts does a paper shredder use? Rexel lists 280 W for its Momentum X312. The page does not identify a load test or give separate idle watts. It is not an energy-per-page result.

Sourced appliance facts
SpecificationSource-listed value
Source model: modelRexel Momentum X312, article 2104572, Ireland listing
Source model: listed power consumption (W)280
Source model: run time from cold minutes6
Source model: run cooldown6/60 minutes as labelled; not a measured energy cycle

Calculate running cost

Enter electrical input watts from your appliance label or measurement. The reference does not establish a single running wattage.

Hours, days and rate start with the running-cost calculator's example, not your usage or tariff. Replace them with your own values. The result is in US dollars.

Rexel's Ireland product listing identifies Momentum X312, article number 2104572. Its specification field is labelled Power consumption (W), with a value of 280. Keep that field label rather than upgrading it to a guaranteed maximum, startup peak or measured office average. The source gives no electrical trace for a particular stack of paper.

Run time and cool-down are separate labels

The page lists a run time from cold of 6 minutes and a run-time/cool-down entry of 6/60 minutes. These are product operating limits, not a record of your workload or proof of a constant power draw during either interval. They do not provide off-mode watts. This reference does not replace the manufacturer's full operating or safety instructions.

Paper capacity is not energy per sheet

Sheet capacity describes what the shredder can accept under its stated paper conditions, not electrical work per sheet. Dividing a watt rating by a capacity count would not establish energy per document. For a meaningful job comparison, record the actual paper amount and include a clear time boundary. Do not assign the same consumption to feed, reverse and waiting states without evidence.

Compare completed jobs with the same boundary

An accumulated energy record should state whether it includes idle time before or after shredding. If several office devices share the meter, their combined total is not this shredder's result. Apply your tariff only to energy supported by the chosen record. A consumption specification cannot certify document security, determine a backup supply or authorize operation beyond the product's published limits.

Sources

See also