Skip to content

Inkjet Printer Wattage: Canon G4000 Series

Inkjet printer wattage depends on the model and mode. Canon lists about 13 W for G4000 series Printing (Copy). Its standby and off entries have their own conditions. They are not measured daily averages for all inkjets.

Sourced appliance facts
SpecificationSource-listed value
Source model: modelCanon PIXMA G4000 series
Source model: printing copy powerApproximately 13 W
Source model: standby minimum powerApproximately 1.1 W; USB connection to PC
Source model: off powerApproximately 0.3 W; USB connection to PC
Source model: supplyAC 100-240 V, 50/60 Hz

Calculate running cost

Enter electrical input watts from your appliance label or measurement. The reference does not establish a single running wattage.

Hours, days and rate start with the running-cost calculator's example, not your usage or tariff. Replace them with your own values. The result is in US dollars.

Inkjet printer wattage in the cited manual

Canon's PIXMA G4000 series online manual gives approximately 13 W for the mode labeled Printing (Copy). Preserve that label rather than converting it into a claim about every print job, photo setting or inkjet model. The page supplies a family reference, not a trace of the reader's particular machine or a measurement made by Wattopedia.

Read the standby and off footnotes

The manual states standby minimum of approximately 1.1 W and OFF of approximately 0.3 W. Its USB-to-PC footnote applies to those entries, and a separate note says the standby wait time cannot be changed. Minimum standby is not a whole-day average or a guaranteed figure for a different connection. OFF is a named condition in the manual, not evidence that the printer is physically disconnected from supply.

Supply range does not give input amps

The same specification lists AC 100-240 V, 50/60 Hz supply. That is the documented input range for this manual family, not a rule for all printers or a complete travel-compatibility decision. There is no current or power-factor entry here. A calculated watts-over-volts value would not resolve the missing AC current rating, operating condition or startup behavior.

Measure a useful print interval before pricing it

To describe energy for a job, record the task, settings, connection and the start and end of the observation. Include or exclude waiting time explicitly, and keep a scanner or computer outside the printer total unless the measurement deliberately includes it. Apply your own tariff only to supported energy. These reference values provide no cartridge-yield, circuit, inverter or generator recommendation.

Sources

See also