Skip to content

How Many Watts Does a DVR Box Use?

How many watts does a DVR box use? The answer depends on its specific model and operating state. Comcast reports 17.4 watts on and 16.0 watts asleep for the Arris AX014ANC, a cable TV box with a DVR function. These are model-specific measurements, not a general estimate for your device.

Sourced appliance facts
SpecificationSource-listed value
Source model: manufacturerArris
Source model: modelAX014ANC
Source model: on power (W)17.4
Source model: sleep power (W)16
Source model: total energy consumption kwh year162
Source model: illustrative constant on scenario: assumed hours per day24
Source model: illustrative constant on scenario: assumed days30
Source model: illustrative constant on scenario: assumed total hours720
Source model: illustrative constant on scenario: watts per kilowatt1,000
Source model: illustrative constant on scenario: calculated (kWh)12.528

Calculate running cost

Enter electrical input watts from your appliance label or measurement. The reference does not establish a single running wattage.

Hours, days and rate start with the running-cost calculator's example, not your usage or tariff. Replace them with your own values. The result is in US dollars.

Comcast's TV Box energy disclosure lists the Arris AX014ANC as a cable box with a DVR feature. The row reports 17.4 watts for on power, 16.0 watts for sleep power, and 162 kilowatt-hours per year for total energy consumption (TEC). Keep the model and state attached to each figure: on power is not sleep power, and TEC is a separate annualized metric. These figures describe this listed model under the source's test context. They do not establish a typical value, a minimum-to-maximum range, or a specification for another provider's equipment.

How Comcast measured the listed values

Comcast says its measurements represent TV Boxes generally configured as deployed in its network and running Comcast software, measured under the test procedures in the TV Box Voluntary Agreement. Comcast also cautions that an individual box's energy use may vary. The 162 kWh/year TEC value is the source's reported metric; it is not a promise about a household's yearly consumption or electricity bill. Your service provider, software, connected equipment, settings, and use can differ from the reported test setup.

On power, sleep power, and annual TEC are different

The listed on and sleep values describe two separate operating states. They are not interchangeable, and this source does not say how many hours a particular household's box spends in either state. The annual TEC figure is also not simply a guaranteed household total. It is a reported metric tied to the voluntary test procedure. Comcast says its chart is updated quarterly, so check the current listing and match the complete model before relying on an example. A provider may supply different equipment or software, and settings can affect how the box behaves. Keep the source, model identifier, state, and measurement context together when comparing data; removing any one of those details can make two unlike measurements look comparable.

How to estimate energy for your own DVR

For a rough scenario using the AX014ANC on-power result, multiplying 17.4 watts by 24 hours and 30 days, then dividing by 1,000, gives 12.528 kWh. This assumes the box draws 17.4 watts continuously for all 720 hours; it is arithmetic, not a measured month and not the source's TEC figure. A DVR that spends time asleep or changes power with its activity will not match that assumption. For a useful household estimate, measure your exact box over a representative period with a suitable energy meter and follow the meter instructions. A shorter reading may miss changes in state or scheduled activity, so record the measurement period and what the box was doing. Do not label a calculated scenario as a measured result.

How many amps does a DVR box use

The cited row reports power in watts, but it does not give this model's input current or power factor. Dividing the reported watts by an assumed household voltage would not establish its actual current. Read the input rating on the box or power-adapter label and consult documentation for the exact model. An adapter's output rating is not a measurement of the box's power drawn from the outlet. If you need actual operating current, use properly rated measurement equipment and follow its instructions; do not infer a circuit requirement from the wattage example.

Match the provider and complete model number

DVRs and TV boxes differ, so match the manufacturer and complete model number before applying a published example. The cited model is an Arris cable TV box with a DVR feature, reported in Comcast's own network configuration. If your provider or model is different, the stated readings may not describe your equipment. Similar-looking model names are not enough to assume that hardware, software, power states, or measured values match. Check the marking on your device and the provider's current support information. This reference does not determine a breaker, wire, outlet, surge requirement, or installation method. For an electrical installation question, use the product instructions and consult a qualified professional.

Sources

See also

Common questions

How many watts does the Arris AX014ANC use?

Comcast reports 17.4 W on power and 16.0 W in sleep for the AX014ANC under its stated test context. Comcast cautions that an individual TV Box may vary.

Is 17.4 watts typical for every DVR?

No. It is the on-power result listed for one specific Arris cable TV box with DVR. Do not treat it as a general DVR rating or range.

Does 162 kWh per year predict my bill?

No. It is Comcast's reported TEC metric for that model under the agreement's test context, not a forecast of your household's measured use or cost.