| Specification | Source-listed value |
|---|---|
| Historic nameplate example: minimum (W) | 900 |
| Historic nameplate example: maximum (W) | 1,200 |
Current at an assumed voltage
Calculated examples for single-phase AC at power factor 1, using current = watts ÷ volts. These are not product-rated currents and do not show that a heater or other appliance can use the assumed supply.
| Example input (W) | Assumed voltage (V) | Calculated current (A) |
|---|---|---|
| 900 | 120 | 7.5 |
| 900 | 240 | 3.75 |
| 1,200 | 120 | 10 |
| 1,200 | 240 | 5 |
Calculate running cost
Enter electrical input watts from your appliance label or measurement. The reference does not establish a single running wattage.
Hours, days and rate start with the running-cost calculator's example, not your usage or tariff. Replace them with your own values. The result is in US dollars.
The coffee-maker entry gives a range without separate size classes or operating modes. It does not label either endpoint as a small drip machine, a larger machine, brewing, or keeping coffee warm. It also does not identify a thermal carafe or pod system. Those distinctions must come from the particular product, not an interpretation of this range.
How many amps does a coffee maker use
For illustration only, assume single-phase AC at a power factor of 1. At 120 volts, 900 watts is 7.5 amps and 1,200 watts is 10 amps. At 240 volts, 900 watts is 3.75 amps and 1,200 watts is 5 amps. These are conditional arithmetic examples, not measured currents or installation recommendations. Do not assume a supply voltage or power factor for your equipment. No circuit, breaker, conductor, receptacle, or backup-system selection follows from this example.
Questions this source cannot answer
For a daily coffee-cost question, decide whether you want the brewing interval or the complete period the appliance remains connected. Measure the relevant period and record the operating state. If the question includes a separate grinder or kettle, keep that equipment separate from the coffee-maker reading. A nameplate number alone supplies no daily usage schedule.
What to do with the nameplate
Check the base label and the exact manual before moving to an electrical calculation. A hypothetical current derived from the source bounds does not rate your countertop connection. If the product's documented input differs, use that input instead. Do not create a category-average wattage by averaging the historical endpoints or turn that midpoint into a preset.