Skip to content

How Many Watts Does a Clock Radio Use?

How many watts does a clock radio use? VCE lists 10 watts in its historic nameplate examples. These are general examples from 2020, not ratings for your model.

Sourced appliance facts
SpecificationSource-listed value
Historic nameplate example: listed (W)10

Current at an assumed voltage

Calculated examples for single-phase AC at power factor 1, using current = watts ÷ volts. These are not product-rated currents and do not show that a heater or other appliance can use the assumed supply.

Conditional current examples, not product ratings
Example input (W)Assumed voltage (V)Calculated current (A)
101200.0833
102400.0417

Calculate running cost

Enter electrical input watts from your appliance label or measurement. The reference does not establish a single running wattage.

Hours, days and rate start with the running-cost calculator's example, not your usage or tariff. Replace them with your own values. The result is in US dollars.

The clock-radio line contains a single category example, not separate figures for the alarm, illuminated clock, audio playback, or an accessory charging port. There is no model identifier or stated test schedule. In particular, the source cannot say how much your clock uses overnight merely because the display remains visible.

How many amps does a clock radio use

For illustration only, assume single-phase AC at a power factor of 1. At 120 volts, 10 watts is 0.0833 amps. At 240 volts, 10 watts is 0.0417 amps. These are conditional arithmetic examples, not measured currents or installation recommendations. Do not assume a supply voltage or power factor for your equipment. No circuit, breaker, conductor, receptacle, or backup-system selection follows from this example.

Questions this source cannot answer

To answer an overnight-cost question, define the observation interval and note whether the radio was playing or only displaying the time. Include only the equipment connected to the meter. If another charger shares the connection, its presence changes what the reading represents. Use the recorded energy and the tariff that applies to that period.

What to do with the nameplate

A stereo system is a different source entry from a bedside clock radio. Do not borrow its range to fill missing clock settings. Record the clock's model and input information separately from any backup-battery details. If you need actual input current, use documented or suitably measured information for the clock rather than treating this historical example as a specification.

Sources

See also