Skip to content

How Many Watts Does a Box Fan Use? Model 9723

How many watts does a box fan use? The answer varies by model and selected speed: Air King's product details list 105 watts on high, 87 on medium, and 65 on low for its model 9723. These manufacturer ratings describe that specific fan; they are not a tested average or a reliable estimate for every box fan.

Sourced appliance facts
SpecificationSource-listed value
Watts per kilowatt1,000
Source model: modelAir King 9723
Source model: high speed (W)105
Source model: medium speed (W)87
Source model: low speed (W)65

Calculate running cost

Enter electrical input watts from your appliance label or measurement. The reference does not establish a single running wattage.

Hours, days and rate start with the running-cost calculator's example, not your usage or tariff. Replace them with your own values. The result is in US dollars.

A box fan has no single wattage that applies to every brand and model. Air King's manufacturer specifications list 105 watts on high, 87 watts on medium, and 65 watts on low for model 9723. Those speed-specific values answer the question for this model only. They do not establish a category-wide range, a typical value, or what another fan will draw. The product page identifies this as a three-speed box fan and places the figures in a Watts (High/Med/Low) table. That direct specification is more useful than an old, unverified category number because it identifies the model and the setting. If your fan is not an Air King 9723, check its own label or exact model documentation instead of borrowing these figures.

What the Air King 9723 ratings mean

The Air King table associates each listed watt rating with a fan speed: high is 105 watts, medium is 87 watts, and low is 65 watts. Use the figure for the setting you selected when describing this particular model. The source does not claim that every box fan has the same three settings, the same motor, or the same electrical draw. It also does not publish measurements for every room, supply condition, or individual fan. These are manufacturer specifications, not a test result from Wattopedia and not a measurement of a full day of operation. The watt values should not be averaged into one supposedly typical number. If another manufacturer's label gives a different result, that model-specific label is the relevant source for that fan.

How many amps does a box fan use

There is no universal amp figure for box fans. The watt ratings in this example do not establish the current for a different model or supply condition. Check the rating label and manual for the exact fan you own, and use the manufacturer's current information when it is provided. Watts and amperes describe different electrical quantities, so do not treat the watt figure as though it were an amp figure. This article is an appliance-specification reference, not instructions for choosing a cord, breaker, or wire. Follow the exact product manual and applicable local requirements when making an electrical decision.

Watts are not the same as energy use

Watts describe a rate of power; kilowatt-hours describe energy accumulated over time. The model 9,723 watt figures do not reveal how long a fan runs in your home, which setting you use, or the energy recorded over a billing period. For a simple estimate, multiply a supported watt rating by the hours you assume the fan operates, then divide by 1,000 to express the result in kilowatt-hours. Treat that as a scenario based on your assumptions, not as a measured result or a promise about actual energy use. To measure one fan's consumption, use a suitable energy meter within its ratings and follow the meter maker's directions. Note the exact fan model, speed, elapsed time, and measurement method so another reader can understand what the result represents.

Find the rating for your own fan

Look for the model identifier and electrical rating on the fan or in its owner's manual. Compare the complete identifier with the manufacturer's documentation; product names can cover more than one design. If a manufacturer publishes power by speed, record the value for the setting you are discussing and keep the setting beside the number. Do not use a different model's specification as a substitute, and do not convert an airflow rating into electrical watts. If the label is missing, damaged, or unclear, contact the manufacturer with the model details rather than guessing. For the Air King 9723 specifically, the published speed table lists 105 watts on high, 87 on medium, and 65 on low. Other box fans need their own model-specific source.

Sources

See also

Common questions

Is 105 watts typical for every box fan?

No. It is the high-speed rating listed for Air King model 9723. The manufacturer lists different values for medium and low, and other models can differ.

Does a fan use its listed watts for every hour it is on?

The product page lists ratings by speed, but it does not report a measured energy total for a particular room or time period.

Can I use this watt rating to choose a breaker or wire?

No. Check the label and manual for your exact fan and follow applicable electrical requirements. This page is not circuit-sizing advice.