| Specification | Source-listed value |
|---|---|
| Source model: model | Original Prusa MK4S 3D printer |
| Source model: pla settings consumption (W) | 80 |
| Source model: abs settings consumption (W) | 120 |
| Source model: psu rating (W) | 240 |
Calculate running cost
Enter electrical input watts from your appliance label or measurement. The reference does not establish a single running wattage.
Hours, days and rate start with the running-cost calculator's example, not your usage or tariff. Replace them with your own values. The result is in US dollars.
How many watts does a 3D printer use?
Prusa's MK4S product page lists 80 W for PLA settings and 120 W for ABS settings in the Power consumption row. Those labels belong with the numbers. They do not establish a category average, a value for every filament or a range that covers every print. The page gives no corresponding consumption entry for other materials in that row.
The PSU rating is not print consumption
A separate row lists a 240 W power supply. That entry describes the PSU, while the neighboring row addresses consumption at named material settings. Neither field supplies a measured startup peak or a heating trace. Using PSU capacity as the continuous draw would replace the actual consumption labels with a different quantity and would not describe the cited printing conditions.
Material labels do not define a full test
The PLA and ABS entries do not state nozzle and bed setpoints, room temperature, print geometry or an averaging interval. The page's maximum nozzle and heatbed temperatures are capability limits, not documented settings for these consumption figures. Keep the material labels without adding guessed temperatures or claiming the values include a complete warmup and cooldown cycle.
Track the print interval and included equipment
To compare energy per completed job, record the file, material settings and elapsed observation period. State whether the record begins before heating and ends after the print, and identify any separately powered accessories included in the total. The product page discusses enclosure add-ons, but its power row does not assign them separate consumption. Price only energy supported by the chosen observation boundary.
Sources
- Original Prusa MK4S 3D Printer | Original Prusa 3D printers directly from Josef Prusa. Accessed 2026-10-22.